Plastering Techniques, Material And Tools For Smooth Plaster


Comfortable and attractive building structures for residential, official or manufacturing purposes give a feel of relief and pride. Buildings with nice paints on the smooth plasters are all the more attractive and enhance their overall value. We come across many buildings that suffer from patches of loose plaster or the cracks on their internal walls. North London plaster repairs and other prominent companies offer their valuable services for such tasks.

Plastering techniques – Those needing re-plastering work because of patches or loose plasters here and there should know the viable methods. Smaller cracks can be set a right with apt flexible filter, followed by sanding for smooth finishes. However, the larger patches of loose or damaged plaster need to be re-plastered well. Suitable surface for overall paint is needed to facilitate nice looks.

You need to hire the services of dedicated plasterer that knows good technique and is equipped with a big deal of practice. Services of competent DIYer may be hired for large amount of patch plastering task.

Browning or Bonding plaster – The needy persons may use this type of plaster with a topcoat of multi-finish for repairs. One coat plaster available from the DIY stores is quite good. Available in quantities of 2.5 to 12.5 kgs of weight or more than that, such plaster materials are quite useful. The one coat plaster is beneficial as regards its drying to white finish.

Protection – Plastering or re-plastering may involve dust that may be breathed in while this task is in progress. It is wise to mix the plaster outdoors. Use of face mask is better to remain protected from the dust that may go into your body along with the air that you breathe in. Make use of an old towel or the dust sheet for protecting the floor. Soft hand brush or old paint brush may be used to brush away the dust or remove the loose plaster. Splashing or flicking little water over the walls is good to protect the walls from getting dried up and the brickwork to absorb water from the new plaster in quick manners.

Application– One application of plaster is sufficient if the patch is about ½ inches in depth. The deeper patches may require two applications of plaster to avoid dragging of the wet plaster that is heavy enough. It is wise to let the first application sufficiently dried up before going ahead with the second one.

Do not forget to make use of the plastering towel. Excessive plaster in any manner should be removed and it should be allowed to get dried up. The new plaster should be smoothed over with the trowel before flicking the water on it. This is good to ensure smoother plaster finish. It is known as ‘bringing the cream to the top’.

Tools – Use of the plasterers trowel, two buckets, face mask, old paintbrush, mixing stick, dust sheet/old towel, fork and sanding block is made for the entire plastering or re-plastering task by North London plaster repairs or other reliable concerns.

Do adhere to the above tips and enjoy nice plastering work.


Comments are closed.