web analytics

Things to know before getting a hot water installation at your home

A water heating system is a device which works on the principles of thermodynamics. The process consume energy from outer source and increases the temperature of water from the existing level by heating it . The first water heater was made by Benjamin Waddy Maughan in 1868 which did not use any solid source of energy. Later people like Edwin Rued further enhanced the water heater’s design and several other people have ever since worked in creating a more efficient and high functioning water heating devices. Hot water is typically used in household matters like cleaning, bathing etc, but might also be used for car engines and in several industries which also uses steam. Today, several companies manufacture thousands of devices to heat water. Some of the water heating devices used mainly for domestic purposes involve kettles, pots, and cauldrons. Other devices are electric geysers, heat exchangers, and boilers which provide a continuous supply of hot water.

External sources used by the heating device

An extremely notable device is a space heating device which uses hot water to warm a certain space enclosed within an area. A feature that defines a water heater’s type is the type of energy source used by it. It may use electricity, solar energy, natural gas, propane or heating oil. It is essential to use a water heater which depends more on renewable energy or might consume less energy so that it costs us less and does less harm to our environment.

Water heater buying guide

A water heater buying guide thus can turn out to be extremely useful in this case. A good buying guide has detailed information on all the devices and reliable companies selling these devices. The guide also usually involves the amount of energy they consume and tips on buying the apt water heating device. Some of the water heating devices are -:

  • Electric heaters -: This transfers energy to water at a percentage of almost 98% and is a little more efficient.
  • Gas fired heaters -: The maximum amount of recovery efficiency of this device is 82 to 94% as it loses the rest of the heat with flue gases.
  • Energy star qualified tank heaters -: These have energy factors of 67% or higher.
  • Solar water heaters -: These heaters use solar energy and have a solar collecting panel attached to it which is kept outside in the sun. These devices are becoming popular because they require almost no money to be spent on energy source and are environment friendly.
  • Geothermal heating systems (Gravity fed systems) -: These systems are mainly used in countries like New Zealand and Iceland. These systems use geothermal energy as a power source to heat water.

Features of modern systems

From time to time, with advancements in technology, certain features are being incorporated in these systems. In modern systems, a check valve is added to the inlet and outlet. Other improvements in the water heater features are an electronic ignition in models which use fuel, cycle timers, sealed air intake systems and pipe insulations.

Many hazards are associated with water heating devices and thus, one should read a buying guide to get tips on safety before purchasing one. The heating element must be made out of nickel or an alloy of copper and nickel, so that there is insulation between water and the element. You should ask certain questions to yourself before buying water heating device like which device is most suitable and consume less energy? Or what type of water heater would yield more benefits? To answer this one must refer to a good buying guide and then decide.

Tips on what to ask your plumber before installing a device -:

  • Is the plumber licensed
  • Which is the most suitable place to install the product?
  • How much is the cost?

With all the information sorted, you can make your final decision and are ready to go for hot water installation.

Comments are closed.