Learn how to paint the exterior of your home


No need to be a professional painter to beautify and protect your exterior house like a pro.

Learn how to paint the exterior of your home

Preparation for painting

First, remove all of which is removable, such as planters, mailboxes, shutters, numbers, hoses, garden furniture, lighting, etc. For the rest, such as bushes and what cannot be removed, cover with drop cloths, as areas under the sections to paint.

The steps preceding the paint are: cleaning, which may also be effected by pressure, repairs (fill holes and cracks with caulking), and the laying of the finish on all surfaces.

When the primer is dry, and all the preparation is completed, move on to painting.

Do not forget to mix your paint before you start painting and also do it during use.

Start with the body of the house

You can paint with a brush, roller or both. The roller can save time, but the brush is still required for the corners, moldings and doors.

Painting with a brush

In order to soak your brush, immerse it in the paint in the first third of the hair and shake it lightly against the inside of the container. It is not useful to smooth the hair against the rim of the container, as too much paint will be removed.

Applying paint, make long even strokes with your brush. On the facing surfaces declines, paint buildup along the horizontal edges mean too thick or too little spread application.

We must remember that to get a coat of paint based uniform oil, we must move the brush several times.

Latex paints require less passage of the brush and because they dry quickly, excessive passages could cause marks in the film. For latex paints, generously apply the paint, give one or two strokes of the brush and let dry.

Painting with a roller

Brush application is ideal for porous surfaces such as masonry and stucco. Perfect for flat surfaces, the roller does not, however, make and file in the corners too much paint on the outer edges of corners.

To use a roll, dip it in the tray paint by rolling back and forth, removing any excess paint. If drops escape from it by lifting, is that it is too long charge. Effectuate rolling movements in different directions to cover the entire surface. Finish by ironing in only one direction.Finish with moldings

The moldings should be the last to be painted. Start with window frames, doors and window frames, sills and door moldings.

If the paint sticks to the sealant, it can serve as a protection against water. For a clean edge, scrape any excess paint with a razor blade.

If the flaps can be removed, see affix the paint before putting them back in place after everything else is finished.

That’s it! It’s time to admire your work!

Comments are closed.