How To Find Any Kind Of Defect In Your Garage Door Rollers – Top Ways To Inspect Them


If you find your garage door not working properly, then the reason may be the defected door rollers. The rollers are basically located on a shaft that fits into a sleeve or bracket on the door that slides on track.

There are a number of reasons that can cause the door rollers to malfunction or can put extreme stress, and making them break down prematurely. So, how to check out their condition and fix it? Well, take a look at the following points.

Inspect the track for any kind of Interruptions

Firstly, check out the full length of track and ensure that the end evenly come together at the place, where the sections join. If you notice any kind of breaks or bends in track, then it might prevent the garage door from going up and down since it can’t reach next track section properly.

In this case, you can try using pliers to bend the track manually back to its original place. This can mostly happen on the bigger garages, where the large vehicles may hit the corner frequently causing the rails to split. Another thing to check is actual garage door rollers that attach to the door panel.

Check out the Connection between the Rollers and the Door

Inspect each of the garage door rollers and carefully look at the place where the socket or the sleeve is bolted to the panels of the door. If these look broken or bend, then it may need a replacement or a proper fix. You can get more information about it in the following points.

Basically, the rollers function on shared load system where each individual roller balances the height of its panel as it moves through the track. If any one of these is found out to be broken or bent, then it may buckle the panel and can cause the door to snag, while traveling. It can cause more damage in case of the automated system.

Look carefully at the Roller wheels and the Draw cable

Many times, the garage door rollers may become flat or worn-out on one end that may stop the wheel from spinning, rather than dragging itself up or down the track. As a result, it may eat the metal edge of wheel and wear it down very badly.

So, what to do in this case? Well, you can either think of popping out the wheel or replacing it. It can be a great idea to use axle grease in order to lube the track. In this way, you can avoid this kind of situation next time. This generally results due to the rust developing in the tracks or wheels.

The best way to ensure proper condition of the wheels and tracks is to keep them well lubricated. So, the changes in humidity or temperature do not affect them. Now, when it comes to draw cables, their role is to make the rollers to work correctly. This is usually a rotating cable that gets attached in remote door opener and ties on door frame.

To conclude, the above are some of the most common reasons that may cause damage to your garage door rollers. So, just follow the above guide to ensure proper working of them. All the best!


Comments are closed.