How Often Should You Clean Your Sewer?
The sewer in front of your house needs to be maintained for it to operate smoothly. Responsible homeowners should take the initiative to schedule a cleaning of the sewer at least once every 18 – 22 months. This is ideally done by a professional licensed sewer cleaning disasters plumber that is experienced in sewer cleaning. The old sewer line that is more than 40 years old needs to be inspected more frequently.
CCTV Sewer Pipe Inspection
The plumber often uses a camera to inspect the pipeline. The camera is attached to a line that is inserted into the sewer. Whatever that is recorded on the camera will be reflected on the monitor. You will be able to see for yourself how your sewer looks inside. By performing an inspection, the plumber can find out what is causing the blockage such as lime, and grease build-up. Once the clog has been determined, the plumber can decide the best method to clean the sewer.
Drain Cleaning Method
The easiest sewer cleaning method to treat sewer clogging is to insert a snake into the sewer. When it reaches the end, the auger will break up the clog. The use of an auger is suitable for breaking up small clogs in the sewer system. If there is a larger clog, the plumber will recommend the use of the hydro jetting method to solve the problem.
Hydro jetting involves shooting a stream of water at high pressure towards the clogs. It will blast away everything that is blocking your pipe so that water can flow smoothly again. Hydro jetting is effective for flushing away grease, mineral, and other types of obstacles. It is more effective than using a drain auger because it clears the line and not just breaks up an obstruction. Sometimes, the clogs are too stuck to be moved. In these circumstances, the homeowner will need to have the entire pipe cut out and replaced. A trained plumber will be able to inspect the problem and determine whether a pipe replacement is necessary.
Warning Signs that Sewer Drain Need Cleaning
A sewer backup can frequently occur if you have trees near the sewer line. The tree roots will block the waste from flowing into the city sewer drain. If the tree root blocks your sewer, you will hear a gurgling sound in the toilet bowl. The water will seem to drain slowly down the drain. It will also send foul odors up from your sink which is bad for your family’s health. Therefore, if you have tree roots blocking your sewer, you should quickly contact a plumber to overlook the situation. The plumber can use special blades to cut through the roots. The plumber may have to dig the ground since the sewer is located below the ground. If the root causes serious damage to the sewer, the entire drain line will need to be replaced.
Bellied piping is an indication that your sewer needs to be cleaned. The soil around the pipe becomes loose and not able to support the pipe. A belly part is formed in the pipe that attracts all kinds of waste. A plumber can use video inspection to determine the problem and carry out the repair. Grease always creates a blockage for the sewer. So, if you use grease for cooking, remind yourself not to pour the grease into the sinkhole. The more grease you pour into the sink, the faster the blockage will occur. You will need to have a plumber hydro jet your pipe to remove the grease clog.