A Quick Guide To Sandstone Paving Installation


Sandstone pavers are very popular because they are easy to install. Nevertheless, there are many other reasons why people prefer sandstone paving. Sandstone paving can be installed both outdoors and indoors. Furthermore, they are excellent for walkways, balconies and for other numerous places in our home. For all your needs related to sand stone paving, you can consult Meteorstone. Continue reading to discover the simple process of installing sandstone pavers.

If you shop around for Sandstone paving, you will discover that they are available in variety of designs and colors. They can also be cut easily into different shapes and sizes as you require. Sand stone pavers can be installed in different formations and patterns, which is particularly important if you want to create a feature piece. Below are the tips how to install it:

Paving Installation

Step 1: Excavate The Area That Required Paving

Once you have established the area that you want to pave, it is important that you mark it out. This can be done with small wooden stakes as this will make easier for you to distinguish the specific area of terrace or path you wish to build. Once you marked out the area you want work on, excavate it. Than dig out some soil and make a trench that is some inch deep. The depth of the trench can also determine by the thickness of your sandstone paving. Remember to leave an allowance approximately 2 – 3 inches below the paver. The base should be leveled accurately. Once this is accomplished, add base for paving. This base should be a thick layer of cement.

Step 2: installing Sandstone Paving

After finishing the first step successfully, you can begin the sandstone paving. Start from the middle section and work outwards while moving to the edges. You may need to cut down some paving stones to make them fit according to pavement edges. To cut paving stones into required shapes, use the right cutting tool specifically meant for this task although a saw can also be used to do this job. Using the right cutting tool delivers better results and it did not damage paving stones. Lay one sand stone piece at a time and make sure they interlock to create the pattern you want. If you want stones to stick securely on the base to provide a level surface, than hammer paving stones to place them using rubber mallet. Always check the surface with a spirit level to ensure everything is leveled perfectly.

Step 3: Seal The Pavement

Once you have laid all sandstones, pour sand liberally over whole area and then sweep sand between the paving stones as this ensures no gaps are left. Once sand has been poured and all gaps are filled, you can proceed to the next step which is sealing. Use a stone sealer specifically meant for this job and applies it on the whole surface.

Than leave stone paved area to seal for almost 24 hours. But for any help regarding stone paving you can contact Meteorstone for more details.

Comments are closed.