8-Step Guide to Cleaning Your Water Heater Tank


Regular cleaning of your water heater tank is very important because it ensures that the tank does not accumulate sediment which can cause corrosion.  Corrosion means that you are a few steps away from getting a water leak and that translates into a huge budget in repairs. This whole problem can be avoided by either contracting a plumber to do the maintenance or you can follow these steps from Ben Franklin  to clean your tank:

Step 1: Turn off the appliance – Any time you are cleaning an electrical appliance in the home, turning off the power supply both at the unit and the circuit breaker is the first step. This will ensure that the tank is not heating up and also avoid any possible incidents which could lead to electrical hazards.

Step 2: Turn off the water supply – Water should not be running into the tank because it needs to be completely empty to carry out the cleaning process. Also, the water might rinse off the cleaner making it ineffective.

Step 3: Attach a hose pipe to the drain valve – The water heater tank has a drain, you need to attach a hose pipe to the valve of the drain and run the other end into a large container.

Step 4: Open the drain valve – This is to let the water flow out of the tank via the pipe to the emptying container. It might take some time to complete the process, be patient and ensure all the water is drained. Close the valve once this step is done.

Step 5: Pour cleaner into the tank inlet – Remember to use a cleaner that chemically designed to remove calcium, lime and other deposits. Make sure to pour it slowly, a cup at a time, so that it does not overflow.

Step 6: Leave the cleaner for 4 to 5 hours – Time will allow the cleaning agent to work and loosen all the sediment that has been deposited in the tank over time.

Step 7: Test if the cleaner is neutralized – You can do this by using a plastic bag to cover the water heater tank inlet. If the bag inflates it means you need to wait for about an hour for the cleaner to fully neutralize. Remember to do this test again.

Step 8: Rinse and refill – Once the cleaner is neutralized, you will need to rinse out the tank by running water in it and draining a few times. Once this is done, remove the hose pipe, refill your tank and switch on the power.

This process is quite time-consuming but it will give your heater tank a longer lease of life. Should it sound like a job that you prefer not to do yourself, you can always hire a plumbing company to handle the cleaning and maintenance for you. Either way, keep a regular schedule for cleaning your tank to avoid corrosion and keep your water clean and healthy.

Comments are closed.